Haute42 E16 Mirrored Hitbox Leverless Controller For PC/PS4/PS5/Switch /Steam Arcade Stick Controller Joystick Hitbox Fightstick

Haute42 E16 Mirroed Hitbox Leverless Controller For PC/PS4/PS5/Switch /Steam Arcade Stick Controller Joystick Hitbox Fightstick

Product Description

Working voltage: 5V

Link method: USB Type-C

Product size: 296mm * 196mm * 11mm

Supported Platforms : pc /ps3/ps4/switch/ Android/Steam

Product Specifications:1 *Keyboard,1 *Data Cable Type-C,1 *Keycap Puller*1 ,Wind Engine Switch *2

HautePad E16 Mirrored

Designed Specifically For Left-Handed Players, RGB Light Ring and Cool Mechanical Base Plate

01 Compatibility

B — Xinput mode (Windows/Steam)

A — SWITCH mode

X — PS3 / Dinput mode (Raspberry Pi / Android)

Y — PS4 mode (Compatible with PS4 games on PS5 console）

RT — KEYBOARD mode

Input Mode

To change the input mode, hold one of the buttons(as shown above) as the controller is plugged in.

Tips：

This product defaults to Xinput mode，Input mode is saved across power cycles.

PS4 /PS5 Mode

About PS4 /PS5 8 minute disconnection，there are two ways， one is insert a dongle or a officially authorized PS4 wired controller to the EXT.port，We don’t have a recommend one，there are too many choices，maybe you can add our discord with other nice players in haute42 group，oficial Website：haute42-cosmox.com

Web Configurator

This product contains a built-in web-based configuration application which can be started up by holding START when plugging your controller into a PC. Then access //192.168.7.1 in a web browser to begin configuration.

TURBO

Hold TURBO，then press the button which you need to be set for turbo function，then this button will be continuous sending while you press it,to cancel this turbo key，just repeat the privious step.

The turbo key that set will be cleard when power off.

These keys can be set as a Turbo key: A / B / X / Y / LB / RB / LT / RT

04 RGB LED Setting

●BACK + START + X Next Animation

●BACK + START + A Previous Animation

●BACK + START + Y Brightness Up

●BACK + START + B Brightness Down

●BACK + START + RB LED Parameter Up

●BACK + START + RT LED Parameter Down

●BACK + START + LB Pressed Parameter Up

●BACK + START + LT Pressed Parameter Down