Car Speakers 4/5/6.5 Inch Vehicle Door Auto Audio Music Stereo Subwoofer Full Range Frequency 600W 500W 400W Automotive Speakers

1PC 4/5/6.5 Inch HiFi Coaxial Subwoofer 400W/500W/600W Car Audio Music Stereo Sensitivity 93dB Full Range Speaker Damp-proof Car Audio Horn, Fits most car, boat, motorcycle or RV audio systems.

Features:

1. High sensitivity, high voice resolution, and complete and clear detail description.

2. High density magnet, strong voice performance, using aerospace magnets, full of power.

3. High power output, suitable for various music styles such as pop, classical, jazz, country, and rock, all of which can be well controlled.

4. Moisture proof, horn shaped PP rubber and injection molded tire body effectively prevent moisture and reduce deformation.

5. Universal non-destructive support for installing various models.

6. High noise reduction, HiFi level experience, enjoy stereo surround sound on the stage board, combining technology and playability.

Specification:

Voltage: 12V~24V
Speakers Types: Coaxial speakers (Full frequency range)
Color: Black
Applicable models: Universal Car, Truck, Bus, etc
Material: Metal + Rubber + Magnetic
Out Power: 400W(YH-400)/ 500W(YH-500)/ 600W(YH-600)
Frequency Range (Hz): 60 Hz to 20kHz
Impedance: 4Ω
Audio Sensitivity: 93dB
Signal to noise ratio: Less than 1%
Special Features: Damp-proof and High Sensitivity
Model Number: Car Audio Music Stereo
Size(Optional):
4 inch: 10.5*4.6cm/4.13*1.8inch
5 inch: 12.7*5cm/5*1.96inch
6.5 inch: 16.7*5.8cm/6.5*2.28inch

Package(Models to purchase):
1pcs* Speaker

Installation Instructions

To protect the vehicle, cover it with a dust cloth.

Pry the door, unscrew the screws inside and around
the door panel, and force outward from the bottom of the door panel to remove the door.

Remove the original car horn first fix the gasket on the original car horn.

1. To protect the vehicle, add a dust cloth to the vehicle
2. Remove the door panel (trim panel)
3. Remove the original car speaker
4. Fix the speaker bracket
5. Fix the speaker crossover
6. Connect the speaker terminals
7. Fix the speaker to the bracket
8. Connect the cross connection to the speaker wiring
9. Remove the original car speaker and replace the speaker
10. The reset and replacement of the door panel is completed

1PC 4 inch 400W:

1PC 5 inch 500W:

1PC 6.5 inch 600W:

Attention:

1. Before buying, please confirm installation size, ensure the length and height of machine panel is suitable for your car.

2. Before installation, please carefully check the car horn lines, if grounding, please reconnect the lines before linking our machine, otherwise it may burn the machine.

3. The actual power of the speaker itself is not very large, there will be murmurs and buzzing when the speaker is very loud.

4. There will be murmurs and buzzing when the reconfiguration process is not connected correctly.

5. If there is no power amplifier installed, the sound of the main unit is not good and the power is not good, there will be murmurs and buzzing when the speaker is loud.

6. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures.

7. Please allow 1-2cm measuring deviation due to manual measurement.