6.5 inch 200W Car Subwoofer Audio Speaker Bass for Car Home Theater System Upgrade Stereo Component Modification Truck Woofer

1PC 6.5 Inch HiFi Subwoofer 200W Car Audio Music Stereo Sensitivity 91dB Woofer Speaker Damp-proof Car Audio Horn, Fits most car, boat, motorcycle or RV audio systems.

Feature:

The 6.5-inch woofer is engineered for music enthusiasts and professional audio systems seeking powerful and precise bass performance. With a design of 200 watts peak power and 60 watts RMS continuous power, it ensures stable and reliable output even under high dynamic music, delivering impactful and clear sound.

· Optimized magnetic circuit system and rigid cone provide solid and well-controlled bass response, effectively reaching down to 45Hz, avoiding muddiness.

· With a high sensitivity of 91dB, it is easily driven by various amplifiers, delivering full-bodied volume even at moderate power levels.

· Die-cast aluminum frame ensures unit stability and reduces resonance. Large ferrite magnet and high heat-dissipation voice coil design guarantee thermal performance and reliability during prolonged high-power operation.

· Perfect balance of size and performance, ideal for car audio upgrades, bookshelf/floor-standing home speakers, stage monitors, and custom installation projects.

Parameters:

Voltage: 12V~24V
Speakers Types: Bass speaker
Color: Black
Applicable mdels: Universal Car, Truck, Bus, etc
Material: Plastic + Metal + Rubber + Magnetic
Out Power: 200W
Impedance: 4Ω
Audio Sensitivity: 91dB
Signal to noise ratio: Less than 1%
Special Features: Damp-proof and High Sensitivity
Model Number: Car Audio Music Stereo
Size: 6.5 inch

Package:
1* Bass Speaker

Installation Instructions

To protect the vehicle, cover it with a dust cloth.

Pry the door, unscrew the screws inside and around the door panel, and force outward from the bottom of the door panel to remove the door.

Remove the original car horn first fix the gasket on the original car horn.

1. To protect the vehicle, add a dust cloth to the vehicle
2. Remove the door panel (trim panel)
3. Remove the original car speaker
4. Fix the speaker bracket
5. Fix the speaker crossover
6. Connect the speaker terminals
7. Fix the speaker to the bracket
8. Connect the cross connection to the speaker wiring
9. Remove the original car speaker and replace the speaker
10. The reset and replacement of the door panel is completed

Attention:

1. Before buying, please confirm installation size, ensure the length and height of machine panel is suitable for your car.

2.Before installation, please carefully check the car horn lines, if grounding, please reconnect the lines before linking our machine, otherwise it may burn the machine.

3.The actual power of the speaker itself is not very large, there will be murmurs and buzzing when the speaker is very loud.

4.There will be murmurs and buzzing when the reconfiguration process is not connected correctly.

5. If there is no power amplifier installed, the sound of the main unit is not good and the power is not good, there will be murmurs and buzzing when the speaker is loud.

6. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures.

7. Please allow 1-2cm measuring deviation due to manual measurement.