• Description

• Keep away from children.

• Avoid contacting with eyes.

• Use only with adequate ventilation.

• The solder paste contains organic solvent. Avoid repeated contact with skin. If the solder paste gets on your skin, wipe it off with alcohol and rinse thoroughly with water.

• In order to be cautious, in the operation, the smoke released by the solvent during operation should be avoided as much as possible, and the skin and mucous membrane tissues should not be contacted for too long. Avoid repeated breathing of vapor.

Precautions

• The measurement allowed error is ±1.0cm,1.0g.

• Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.

• The weight mentioned in the product description and pictures is gross weight, and the only difference between different models of products is weight.

• In order to prevent counterfeit or pirated products, we will continue to update the product packaging, but this does not affect the quality and use of the product, the new and old packaging will be shipped randomly.

Instructions

• Solder tin paste is a new type of solder material that comes with SMT.

• Solder paste is a complex system that is made of a paste of solder powder, flux, and other additives.

• At the normal temperature, the solder tin paste has a certain viscosity, and the electronic component can be initially adhered to a predetermined position.

• At the soldering temperature, the soldered component and the printed circuit pad are soldered together (Permanent connection.) with the evaporation of the solvent and some additives.

!!!!! The option picture“2 set” means one solder paste and one non-magnetic solder scraper, not two of each!!!!