Beok CCT-28-X Thermostat Controller Wireless Wifi Zone Heating 8-channel for Gas Boiler Water Floor Heating System Actuator

NOTE:

CCT-28-X itself does not have WIFI and requires a WiFi temperature controller to be connected in order to control the entire system through WiFi.
BOT-R6X-NR and BOT-R7X-NR :Only the controller, no receiver, pay attention to the model before purchasing.

The indicator lights and areas connected are corresponding. If you connect the thermostat to the corresponding indicator light, you need to connect the actuator to the corresponding area.

Wiring diagram:

Each zone can only be connected to one thermostat, but a thermostat can be connected to up to 8 zone
CCT-28-X can only connect normally closed actuators, and a maximum of 8 normally closed actuators can be connected in one zone.

“N, L (INPUT).” connect the 220V AC power supply.
“COM, NO” connection to dry contact boiler (a small portion connected to COM, NC）
“Pump” connect to the water pump.
“ZONE 1-8” is connected to the normally closed actuator.
The thermostat is connected to each zone of CCT-28-X via RF.

Control multiple rooms:

One CCT-28-X can connect to eight temperature controllers and control the temperature of eight rooms simultaneously.

Distance of thermostat controller:

The control distance of the thermostat can reach 30 meters when there is wall obstruction indoors
In the absence of obstruction outdoors, the control distance is 200m

Specifications:

Power Supply: 220V AC
Size:18cm*11cm*4cm
Current:max 20mA
Wireless frequency: 433MHZ
Wireless control distance:30M
Working temperature:0-85℃
Pump output delay:5 min
Maximum power of water pump: 1000W

BOT-R6X-WIFI-NR

BOT-R7W(B)-X-WIFI-NR